Google
 
 
 
 
   
VDH SCS-2
Speaker Cables
 


Description:

The SCS - 2 for certain is the very best PTFE insulated pure metal loudspeaker line available in the world.
The size is 2 gauge with 665 strands and a conductor cross-section area of 33.9 mm. Ext. diam. is: 9.70 mm.
The resistance is an extremely low 0.51 Ohm/km.
Each strand is made of a very high grade Matched Crystal (MC) OFC covered with a dense and very pure silver coating in an extrusion process.
The SCS - 2 is available on 50 meter reels or in any specified length with beige PTFE jacket with van den Hul SCS - 2 printing in a brown colour.
The insulation voltage rating is 1000 Volt RMS but the actual test voltage is 3500 Volt RMS.
The tonal quality is superb; especially its extreme and smooth high frequency resolution is exceptional.
The bass reproduction is very natural and powerful.
Shipping weight of 50 meter SCS - 2 is 16.9 kg. without packing.
Special connectors must be used for linking the SCS - 2 to other equipment. vdH advises the use of their heavy AWG 2 series of spade and ring connectors or their The PIN - 2 pin connector in combination with the SCS - 2.
On request vdH do mount our connector types mentioned with some extra charge.
Packing: depending on ordered length.

 
Specifications for SCS-2
 
Cable Type: Single wire, multistrand
Conductor Material: High purity dense Silver coated high purity Matched Crystal OFC
Design Purpose / Application Area(s): Loudspeaker cable
Eff. Conductor / Eq. AWG No. / Strands: 33.9 mm / AWG 2 / 665
External Diameter / -Dimensions: 9.70 mm.
Resistance (20 C / 68 F): 0.51 Ohm/km.
Capacitance: -
Characteristic Impedance: -
Insulation / Dielectric Strength / Test Voltage: PTFE / 1000 Vrms / 3500 Vrms
Connector Types Suitable: vdH's AWG 2 and AWG 1 series of Spade and Ring connectors; vdH's The PIN - 2 pin connector; Custom mountable on ordered lengths.
Standard Sales Units / -Lengths: Available in any length or on 50 m. reels.
Jacket Colour(s) Available: Cream
Remarks: Self mounting of connectors is not advised since special soldering equipment is required; vdH's custom connector mounting service is available.
 
Back to the Cables Page


 


 
© 1997-2013 HIFISHACK. All rights reserved